|
Production and supply of files |
| Print |
|
E-mail
|
|
PROGRAMS
For production the following programs
should be used: Coral, Draw, Adobe Illustrator, and Photoshop.
COLORS before commencing the production of files check if you are using
CMYK palette of colors and not RGB. If you are working in RGB printed will not
be the same as seen on the monitor.
RESOLUTION
You should take care of resolution only if
you are using PHOTOSHOP and to get the visual maximum it is necessary to work
in the 300 dpi resolution.
DIMENSIONS
When you define what exactly you want to do
and determine the dimension it is necessary to add to the desired dimension 2 mm on all four sides.
If you are making business card that has to
be cut to the final format 9x5 cm, during the process it is necessary to make spaces
by adding 2 mm on all four sides. Calling card then needs to be 6,4x5,4 cm.
Fabric and graphic elements should not be placed at the very end of the paper
or the place where cutting should take place to achieve desired dimension. At
the end only certain tones or things can be put intended to go till the very
end. These rules must always be observed no matter what you do!
|
|
|
How to save the file |
| Print |
|
E-mail
|
|
COREL
DRAW
If you are working in Corel it is not
necessary to save the document in some other format, but send it in original
CDR format. It is very important that all textual parts in which some of the
fonts have been used are changed into curves (arrange/convert to curves)
ADOBE
ILLUSTRATOR
If you work in Illustrator it is necessary
to send the document in EPS format and not the original AI extension. In
Illustrator it is necessary to change all fonts into curves (type/create
outlines)
PDF
PDF is format good for printing especially
for making of catalogues, brochures, books...
FONTS
For textual parts one should not use system
fonts which contain Cyrillic characters.
|
|
|
FAQ
